Miele G 1XXX Series Operating Instructions Manual Download Page 35 | Manualshive

Page: 35 / 68

background image

Switching on

^

Make sure the spray arms are not
obstructed.

^

Close the door.

^

Open the stopcock, if it is closed.

^

Switch the dishwasher on with the
On/Off button

K

.

The Start/Stop indicator light flashes
and the indicator light comes on next to
the last programme selected.

Selecting a programme

Choose your programme according to
the type of load and how dirty it is.

The different programmes and their
uses are described in the Programme
Chart later on in this booklet.

Starting a programme

^

Select the programme required with
the programme selector button.

The indicator light next to the selected
programme will come on.

^

Press the Start/Stop button.

The programme will begin. The
Start/Stop and the Wash/Rinse indicator
lights and the indicator light next to the
programme selected all light up.

A programme can only be cancelled
in the first few minutes. Otherwise
the programme must continue to the
end so that important programme
stages (e.g. reactivating the water
softener) are not omitted.

Programme sequence
indicators

After a programme has been started
the current stage of the programme is
indicated by the programme sequence
indicator lights.

Operation

35

«
...
33
34
35
36
37
...
»

Summary of Contents for G 1XXX Series





































































Reviews:

No comments

Related manuals for G 1XXX Series

CleanDesign GSD400T

Brand: GE Pages: 13

Brand: GE Pages: 2

Brand: GE Pages: 2

Brand: NEFF Pages: 52

Brand: Indesit Pages: 72

Sicily Glory G01

Brand: Midea Pages: 65

Brand: Hoover Pages: 17

Brand: Gaggenau Pages: 19

WashSmart WA4127G1

Brand: Fisher & Paykel Pages: 100

Brand: Primotecq Pages: 72

KITCHEN THINK BS 1400

Brand: Hotpoint Pages: 20

Brand: Bauknecht Pages: 18

Brand: Hisense Pages: 36

Brand: Heinner Pages: 58

Brand: ZANKER Pages: 52

Brand: Gaggenau Pages: 72

Brand: NEFF Pages: 56

Brand: Samsung Pages: 104

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands