Miele G 1870 Operating Instructions Manual Download Page 80

Page: 80 / 84

Demo. programme

For showrooms only

The dishwasher is fitted with three
demonstration programmes for
showroom use.

The "Demo programme" and "Demo in
continuous loop" programmes
demonstrate operation and functions.

–

Demo programme

The programme is started by
pressing any button. It will run
through once and then has to be
started again.

–

Demo in continuous loop

This programme will begin as soon
as you switch it on and then will play
in a continuous loop until you switch
it off.

–

Demo with sound

This programme activates the pumps
to demonstrate the sound of the
dishwasher.

Switching on a demo programme

Select the option you want and
confirm this with

Confirm

Switch demo programme

on?

with

Press any button to start the Demo
programme you have selected.

To cancel it, press any button and
confirm it with the OK button.

Switching off the Demo programme

Select the

Off

option and confirm this

with

Confirm

Switch demo programme

off?

with

Factory default

If you have altered any settings from
the factory default, you can re-set them
back to the factory default settings.

Confirm the question

Reset factory

default settings?

with

Confirm the message

All settings

reset to factory default.

with

To close the "Settings

" menu

Press the

C button to come out of the

"Settings

" menu and return to the

main menu.

Settings menu

Summary of Contents for G 1870





















































































Search results

Summary of Contents for G 1870

Reviews:

Related manuals for G 1870

Brands by name

Popular brands

Miele G 1870, Operating Instructions Manual

Search results

Summary of Contents for G 1870

Reviews:

Related manuals for G 1870

Brands by name

Popular brands