Miele G 1870 Operating Instructions Manual Download Page 20

Page: 20 / 84

Add rinse aid only until it is visible in
the opening.

The rinse aid reservoir holds approx.
110 ml.

Close the flap firmly so that it clicks
into place. Otherwise water would
enter the rinse aid reservoir during a
programme.

Wipe up any spilled rinse aid. This
prevents over-foaming occurring
during the next programme.

You can adjust the rinse aid dosage
for best results (see "Settings
menu

, Rinse aid").

Rinse aid low message

When the

Rinse aid low

message

appears, the reservoir contains
sufficient rinse aid for 2 - 3 programmes
only.

Add rinse aid in plenty of time.

If the "2 in 1" or "3 in 1" Tab function
has been selected, the "Rinse aid
low" message will not appear (see
"Settings menu

, Detergent type").

Confirm with

The

Rinse aid low

message will go out.

Before using for the first time

Summary of Contents for G 1870





















































































Search results

Summary of Contents for G 1870

Reviews:

Related manuals for G 1870

Brands by name

Popular brands

Miele G 1870, Operating Instructions Manual

Search results

Summary of Contents for G 1870

Reviews:

Related manuals for G 1870

Brands by name

Popular brands