![background image](http://html.mh-extra.com/html/miele/g-1870/g-1870_operating-instructions-manual_234634055.webp)
Problem
Possible cause
Remedy
Dishes, cutlery and
glasses are not dry
or are flecked.
The rinse aid amount may
be insufficient or the rinse
aid reservoir empty.
Replenish the reservoir,
increase the dosage or
change the brand of rinse aid.
See "Before using for the first
time".
Crockery was taken out of
the cabinet too soon.
Leave it in for longer. See
"Operation".
You are using "2 in 1" or
"3 in 1" tablets, which do
not have a strong enough
drying performance.
Set the Detergent type to
"Normal", and fill the rinse aid
reservoir with rinse aid (see
"Settings menu
J
, Detergent
type").
The dishwasher has been
set for 2 in 1 or 3 in 1
tablets, even though this
type of detergent has not
been used.
Set the Detergent type for the
product being used (see
"Settings menu
J
, Detergent
type").
White residue is
visible on cutlery
and crockery,
clouding occurs on
glassware; film can
be wiped off.
Not enough rinse aid was
used.
Increase the dosage (see
"Settings menu
J
, Rinse aid").
There is no salt in the salt
reservoir.
Fill the salt reservoir. See
"Before using for the first
time".
An unsuitable "2 in 1" or
"3 in 1" tablet has been
used.
Change your detergent. Use a
standard liquid, tablet or
powder detergent and fill the
salt and rinse aid reservoirs in
the dishwasher.
There is a fault with the
automatic water softening
system.
Call the Service Department.
Problem solving guide
55
Summary of Contents for G 1870
Page 81: ...81 ...
Page 82: ...82 ...
Page 83: ...83 ...
Page 84: ...Alteration rights reserved G1870 G2870 1106 M Nr 06 702 740 02 en GB ...