Miele G 1870 Operating Instructions Manual Download Page 75

Page: 75 / 84

Save extras

You can set additional functions e.g. a
longer drying time, for individual
programmes (see "Operation, Selecting
an Extra").

You can use the

Save extras

option to

save settings you have chosen for a
particular programme so that they are
automatically selected when you run
the programme in the future.

The dishwasher is delivered with this
function deactivated.

Select the option you want and
confirm this with

Temperature

You can chose for the temperature to
be displayed as °C/Celsius or
°F/Fahrenheit.

The temperature is set at the factory to
be displayed in °C.

Select the option you want and
confirm this with

Buzzer

When the buzzer is activated, an
audible tone sounds at the end of a
programme and when there is a fault.

The buzzer is activated as standard at
the factory.

The buzzer will still sound if there is a
fault, even if it has been deactivated.

Buzzer at the end of a programme

You will hear the buzzer at the end of a
programme in bursts of five with a short
pause in between. The buzzer will
continue to sound for up to an hour if
you do not switch the dishwasher off.

Buzzer when there is a fault

In the case of a fault, the buzzer will
sound continuously for up to two
minutes if you do not switch the
dishwasher off or correct the fault.

Settings menu

Summary of Contents for G 1870





















































































Search results

Summary of Contents for G 1870

Reviews:

Related manuals for G 1870

Brands by name

Popular brands

Miele G 1870, Operating Instructions Manual

Search results

Summary of Contents for G 1870

Reviews:

Related manuals for G 1870

Brands by name

Popular brands