Miele G 1870 Operating Instructions Manual Download Page 7

Page: 7 / 84

Display

The display is used to select the
following:

– the programme
– extras
– the delay start time
– the "Settings

" menu

During a programme, the display
shows the following:

– the name of the programme
– the current time of day
– the stage the programme is at
– the estimated time left for the

programme to run

– any relevant fault messages and

notes

To save energy the display goes out
after 10 minutes if you do not press
any buttons during this time.
Pressing any button will switch the
display back on again.

A dot in the display next to a button
indicates that a function can be
selected with that button.

The arrows on the right hand side of the
display indicate that more options or
more text can be displayed by pressing
the relevant button.

The

function is used to confirm a

message or setting and also to move to
the next menu or to another level.

The "Settings

" menu is used to alter

the dishwasher’s electronics to suit
different requirements. See "Settings
menu" for more details.

Description of the appliance

Summary of Contents for G 1870





















































































Search results

Summary of Contents for G 1870

Reviews:

Related manuals for G 1870

Brands by name

Popular brands

Miele G 1870, Operating Instructions Manual

Search results

Summary of Contents for G 1870

Reviews:

Related manuals for G 1870

Brands by name

Popular brands