Installing the appliance
70
Installing the appliance
Push the appliance into the niche
until the covers of the fixing brackets
touch the front edge of the side walls
of the housing unit.
–
With 16 mm thick walls:
The spacers should touch the front
edge of the top and bottom of the
side walls of the housing unit.
–
With 19 mm thick furniture
walls:
The front edges of the hinges are
flush with the front edge of the
housing unit.
Make sure that the covers of the top
and bottom fixing brackets lie flush
with the front edges of the housing
unit side walls.
This will create a gap all round of
42 mm
to the front edges of the
housing unit side walls.
On furniture with door fittings (e.g.
stubs, seals etc.)
the dimension of
these must be taken into account
when making sure there is a gap all
round of
42 mm
.
Pull the appliance forwards by the
appropriate dimension.
The hinges and covers will now
protrude by the dimension of the door
fitting.
Useful tip:
Remove the door fittings.
This will ensure that the door is flush
with the surrounding kitchen unit
furniture doors.
Align the appliance on both sides
by altering the adjustable feet using
the spanner supplied.
Summary of Contents for FN 3x402 i AU
Page 80: ......
Page 81: ......
Page 82: ......
Page 84: ...M Nr 10 198 630 00 en AU NZ FN 35402 i FN 37402 i FNS 35402 i FNS 37402 i ...
