Miele FN 3x402 i AU Operating And Installation Instructions Download Page 29

Page: 29 / 84

Further settings

Switching on Sabbath mode



Touch the settings sensor.

All selectable symbols appear in the

display and the



flashes.



Touch the sensors for setting the

temperature (





) repeatedly until

the



symbol flashes in the display.



Touch the OK sensor to confirm your

selection.

The last selected setting flashes in the

display and the



symbol lights up.



By touching the





sensor you

can now switch on Sabbath mode.

To do this, select setting



Touch the OK sensor to confirm your

selection.

The selected setting is applied, the



symbol lights up.

As soon as the



symbol goes out in

the display after 3 seconds, Sabbath

mode is switched on.



Switch off Sabbath mode after the

Sabbath has passed.

Switching off Sabbath mode



Touch the settings sensor to leave

the Sabbath mode.

The temperature appears in the display

and the interior lighting switches on.

Summary of Contents for FN 3x402 i AU





















































































Search results

Summary of Contents for FN 3x402 i AU

Reviews:

Related manuals for FN 3x402 i AU

Brands by name

Popular brands

Miele FN 3x402 i AU, Operating And Installation Instructions

Search results

Summary of Contents for FN 3x402 i AU

Reviews:

Related manuals for FN 3x402 i AU

Brands by name

Popular brands