manualshive.com logo in svg

Miele FN 3x402 i AU, Operating And Installation Instructions

Share
Download
Miele FN 3x402 i AU Operating And Installation Instructions Download Page 2

Contents

2

 

Warning and Safety instructions

.......................................................................... 4

Caring for the environment

................................................................................. 12

How to save energy

............................................................................................. 13

Guide to the appliance

......................................................................................... 15

Control panel.......................................................................................................... 15

Switching on and off

............................................................................................ 18

Before using for the first time................................................................................. 18

Operating the appliance......................................................................................... 18

Switching off for longer periods of time................................................................. 19

The correct temperature

..................................................................................... 20

Temperature display............................................................................................... 20

Setting the temperature ......................................................................................... 21

Using SuperFreeze

............................................................................................... 22

Temperature and door alarm

.............................................................................. 23

Temperature alarm ................................................................................................. 23

Switching the temperature alarm off early ........................................................ 23

Door alarm ............................................................................................................. 24

Further settings

.................................................................................................... 25

Safety lock 

......................................................................................................... 25

Audible tones 

.................................................................................................... 26

Display brightness 

............................................................................................. 27

Sabbath mode 

.................................................................................................... 28

Adjusting the interior fittings

.............................................................................. 30

Removing freezer drawers on telescopic runners.................................................. 30

Removing the shelves............................................................................................ 30

Freezing and storing food

................................................................................... 31

Freezing fresh food ................................................................................................ 31

Storing frozen food ................................................................................................ 31

Home freezing........................................................................................................ 32

Tips on home freezing ...................................................................................... 32

Packing ............................................................................................................. 32

Before placing food in the freezer..................................................................... 33

Placing food in the freezer ................................................................................ 33

Defrosting............................................................................................................... 34

Making ice cubes................................................................................................... 35

Summary of Contents for FN 3x402 i AU





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands