Miele FN 3x402 i AU Operating And Installation Instructions Download Page 24

Page: 24 / 84

Temperature and door alarm

Door alarm

An alarm will sound if the door is left

open for too long. The alarm symbol



will light up.
The time until the door alarm is

triggered depends on the selected

setting and can be either 2 minutes

(factory default) or 4 minutes. The door

alarm can also be switched off (see

"Further settings - Audible tones").
As soon as the door is closed, the

audible tone will stop and the alarm

symbol



will disappear from the

display.

If no audible tone sounds even though

a door alarm is available, then the

audible tone has been switched off in

settings mode (see "Further settings -

Audible tones").

Switching the door alarm off early

If the noise of the alarm disturbs you,

you can switch the alarm off early if you

wish.



Touch the alarm off sensor.

The audible tone stops.

The alarm symbol



remains

illuminated until the door is closed.

Summary of Contents for FN 3x402 i AU





















































































Search results

Summary of Contents for FN 3x402 i AU

Reviews:

Brands by name

Popular brands

Miele FN 3x402 i AU, Operating And Installation Instructions

Search results

Summary of Contents for FN 3x402 i AU

Reviews:

Brands by name

Popular brands