Problem solving guide
44
Problem
Possible cause and remedy
The compressor is
switching on more
frequently and for
longer periods of time,
so the temperature in
the appliance is
dropping.
The temperature setting is too low.
Correct the temperature setting.
The door is not properly closed.
Check whether the appliance door closes
properly.
A large amount of food is being frozen at once.
See "Freezing and storing food".
The SuperFreeze function is still switched on.
You can switch off the SuperFreeze function earlier
to save energy:
Touch the SuperFreeze sensor.
The compressor comes
on less and less often
and for shorter periods
of time. The
temperature in the
appliance rises.
This is not a fault. The set temperature is too high.
Correct the temperature setting.
Check the temperature again after 24 hours.
The food begins to defrost.
The room temperature is lower than the ambient
temperature for which the appliance is designed.
Operating in a room which is too cold will cause the
compressor to switch off for too long, causing the
freezer to become too warm.
See "Installation advice - Location".
Raise the temperature of the room.
An LED indicator light is
flashing at the back of
the appliance at the
bottom near the
compressor (depending
on model).
This is not a fault. The electronic unit for the
compressor is equipped with an operation and fault
diagnosis LED indicator light which flashes every 15
seconds (depending on model).
Summary of Contents for FN 3x402 i AU
Page 80: ......
Page 81: ......
Page 82: ......
Page 84: ...M Nr 10 198 630 00 en AU NZ FN 35402 i FN 37402 i FNS 35402 i FNS 37402 i ...
