Imp
ort
Ap
plia
nce
s.c
om
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
Operation
26
Open the drawer and the glass lid.
Place vacuum adapter
over the va-
cuum pump air intake valve
.
Attach the connector
to the con-
tainer lid. Make sure that the closure
of the lid is turned to "seal" (closed).
Switch the drawer on with the
sensor.
The
and
sensors will light up.
Touch the
sensor.
The
and
sensors go out. The
and
sensors light up.
Touch the
sensor repeatedly until
the segment for the required vacuum
level lights up.
Touch the
sensor.
The vacuuming process will start.
Leave the glass lid open for the en-
tire duration of the vacuuming pro-
cess.
If an excessive amount of bubbles
form you can cancel the vacuuming
process by pressing the
sensor
(see "Cancelling the vacuuming pro-
cess").
After the vacuuming process
An acoustic tone will sound.
Dettach the connector from the con-
tainer lid. Make sure that the closure
of the lid is still turned to
"seal" (closed).
Remove the vacuum adapter from the
vacuum pump air intake valve.
Before starting a new vacuuming
process, check that the vacuum ad-
apter, the tube and the vacuum
chamber are clean and dry.
Remove any soiling or liquid residues
if necessary.
