Miele DA 3060, Operating And Installation Manual

Page: 11 / 36

a
Exhaust socket ø 150 mm
b
Control panel
c
Grease filter
d
Pull-out deflector plate
e
Hob lighting
f
Charcoal filter
(extra accessory available to order
for recirculation mode)
g
Drop-down lightshield to conceal
control panel
The front of the deflector plate can
be fitted with a lightshield to match
your kitchen furniture.
The front can also be fitted with a
DFB 61 lightshield, available as an
optional accessory.
h
Hob lighting switch
The hob lighting can be switched on
and off independently of the fan.
i
Sliding switch for the fan
^
Pull out the deflector plate.
^
To switch on, slide the switch to the
required setting.
Depending on the intensity of the
cooking vapours, levels "1" to "3" are
usually sufficient for normal cooking.
For short periods of intensive cooking
vapours, e.g. when searing meat, you
may wish to select the
Intensive
Setting "IS".
Pull the deflector plate right out to
achieve optimum extraction and to
prevent unnecessary noise levels.
It is advisable to run the fan for a few
minutes after cooking is finished to
neutralise any lingering odours in the
air, whether you are using air extraction
or recirculation mode.
To switch the fan off
^
Slide the switch to position “0”.
or
^
Push the deflector plate back in.
The next time the deflector plate is
pulled out the cooker hood will
operate at the power level it was
previously at.
Guide to the appliance
11