Miele CVA 615 Technical Information Download Page 69

Page: 69 / 110

Technical Information

CVA615 Coffee System

5.22

Brew Unit - Installation

1. Remove the Waste Container.
2. Slide the Brew Unit into position in the appliance until the

locking mechanism engages with the drive mounting plate.

Note

Do not press the part marked PRESS during

the installation of the

brew unit.

5.23

Brew Unit – Cleaning Procedure

Note

- Clean the Brew Unit by hand only, it SHOULD NOT be cleaned
in a dishwasher.

- Lubricate the Brew Unit with silicon every 500 cups

1. Remove the Waste Container.

Note

The Brew Unit can only be removed after the Waste Container
has been removed from the appliance.

2. Grasp the brew unit by the handle and press with the thumb on

"PRESS". (Figure 5-19, Item 1).

Figure 5-19:

Brew Unit – Removal for Cleaning

3. Pull outward to remove the Brew Unit (Figure 5-19, Item 2).

Summary of Contents for CVA 615















































































































Search results

Summary of Contents for CVA 615

Reviews:

Related manuals for CVA 615

Brands by name

Popular brands

Miele CVA 615, Technical Information

Search results

Summary of Contents for CVA 615

Reviews:

Related manuals for CVA 615

Brands by name

Popular brands