Miele CVA 615 Technical Information Download

Page: 64 / 110

Technical Information

CVA615 Coffee System

5.17

Hot Water Nozzle – Removal

Refer to figure 5-16.

1. Open the door.
2. Remove the Rear Door Panel and Fascia Panel Cover

(5.10 & 5.11).

3.  Loosen the nut (2).
4.  Remove the holder (5).
5.  Unscrew the sleeve, (1) from the connector (6).
6.  Pull out the Hot Water Nozzle (3), from the connector.

Figure 5-16:

Hot Water Valve Components

5.18

Hot Water Valve (Y12) – Removal

Refer to figure 5-16.

1. Open the door.
2. Remove the Rear Door Panel and Fascia Panel Cover

(5.10 & 5.11).

3.  Disconnect the electrical connection (7).
4.  Loosen the Hot Water Valve Nuts.
5.  Pull out the Hot Water Valve from the connector (6).

1 - Sleeve
2 - Nut
3 - Hot water nozzle
4 - Fixing screws - Holder
5 - Holder
6 - Connector
7 - Hot water valve (Y12)

Summary of Contents for CVA 615















































































































Search results

Summary of Contents for CVA 615

Reviews:

Related manuals for CVA 615

Brands by name

Popular brands

Miele CVA 615, Technical Information

Search results

Summary of Contents for CVA 615

Reviews:

Related manuals for CVA 615

Brands by name

Popular brands