Fit the wall units and rangehood
before fitting the cooktop to avoid
damaging the surface.
~
The veneer or laminate coatings of
worktops (or adjacent kitchen units)
must be treated with 100 °C
heat-resistant adhesive which will not
dissolve or distort.
Any backmoulds must be of
heat-resistant material.
~
This appliance must not be installed
and operated in mobile installations
(e.g. on a ship).
~
The Salamander CS 1421 S must
not be installed directly next to a
barbecue grill (CS 1312/1322 BG) or a
TepanYaki (CS 1326/1327). It is
essential to maintain a distance of at
least 150 mm between these two
appliances.
~
After installation, ensure that the
connection cable is without hindrance
and that there is no mechanical
obstruction which could damage it.
~
Ensure that the electrical cable is
installed in such a way that it does not
touch any parts of the appliance which
become hot. The cable will be
damaged by extreme heat.
~
Do not use any sealant except
where expressly instructed to do so.
The seal underneath the appliance
provides a sufficient seal for the
worktop.
~
Observe carefully the safety
distances given on the following pages.
All dimensions in this instruction booklet
are given in mm.
,
This appliance must be installed
and connected to services in
accordance with local and national
safety and building regulations.
Safety instructions for installation
19
Summary of Contents for CS 1421 S
Page 33: ...33 ...
Page 34: ...34 ...
Page 35: ...35 ...
Page 36: ...Alteration rights reserved 4611 M Nr 07 634 870 02 ...
