Converting to another gas type
56
To change the jet for the inner burner
d
Jet disc (main jet for the inner
burner)
e
Air intake sleeve
f
Vent
Remove the screw
from the fit-
ting
with an SW 8 spanner while
counterholding it with an SW 12
spanner.
Remove the screw fitting
from
part
with an SW 12 spanner while
counterholding it with an SW 12
spanner.
Remove jet disc
from fitting
and
replace with the new jet disc (see jet
table).
Adjust air intake sleeve
until the
two vents
have a 2 mm gap, as il-
lustrated.
Reassemble the parts in reverse or-
der and carry out a leakage test.