manualshive.com logo in svg

Miele COFFEE SYSTEM CVA 4068, Technical Information, Page: 106 / 118

Share
Download
Miele COFFEE SYSTEM CVA 4068 Technical Information Download Page 106

 
 

Technical Information

 

 

 

106 

 

CVA 4062/CVA 4066/CVA 4068 Coffee Systems

CVA TRIAC failure parts matrix: 

Coffee heater: 

Description 

CVA 4062 

CVA 4066 

CVA 2652 

CVA 2662 

Electronic 

7330534 7330544 7312672 7312672 

NTC 7270620 7270620 7270620 7270620 
Temp 

Limiter 

6670260 6670260 6580130 6580130 

Heater 

6913330 6913330 6913330 6913330 

Fuse 7033350 7033350 7033350 7033350 
Gaskets 

(4) 

6058580 6058580 6058580 6058580 

Elbows 

7270641/7270631 7270641/7270631 6453511/6457541 6453511/6457541 

Steam heater: 

Description 

CVA 4062 

CVA 4066 

CVA 2652 

CVA 2662 

Electronic 7330534 

7330544 

7312672 

7312672 

NTC 7270620 

7270620 

7270620 

7270620 

Temp Limiter 

6592770 

6592770 

6060040 

6060040 

Heater 6913321 

6913321 

6913321 

6913321 

Fuse 7033350 

7033350 

7033350 

7033350 

Gaskets (4) 

6058580 

6058580 

6058580 

6058580 

Elbows (2) 

6457541 

6457541 

6457541 

6457541 

 
 

2  

The Display Clock on Models CVA 4062 and CVA 4066 May 
Change Time Unexpectedly 

On some CVA coffee systems, the display clock may change suddenly back to 12:00 
without any warning or user intervention. This applies specifically to the CVA 4062 and 
CVA 4066 models. Other functions of the coffee system are not affected. 

This is a software issue. To resolve it please apply the firmware update provided in the 
latest version of the MDU software (V4.5 11.19.2009) 

If you experience any difficulty when connecting to the CVA with the optical interface, 
remember you may need to turn the machine off for a few seconds using the main 
power switch.   
 
 

3  

CVA & French Roast Coffee 

In many cases, customers who use Starbucks or Costco French Roast coffee are 
experiencing frequent episodes of brew unit blockages. We do not recommend using 
this style of coffee at this time. The preferred method for brewing French Roast is to 
use a ‘French Press’. Our manufacturing engineers are looking into this situation and if 
there are any changes, we will announce it here. In the meantime, you can quote this 
passage from the Starbucks UK Website: 

http://starbucks.co.uk/en-
GB/Best+Coffee/Pages/Roast.htm 
 

Brewing French Roast

 

 

The best brewing method for French Roast is the coffee press (cafetiere). 

 

Summary of Contents for COFFEE SYSTEM CVA 4068























































































































Reviews:

No comments