Technical Information
18
B 890/B 990
Figure 010-5:
Bowden Cable and Plastic Hinge
11.
Carefully
remove the Bowden cable holder from the table, via the
opening behind the hinge. This holder is very small and can fall inside the
table!
12. Remove the Bowden cable pin from the table (Figure 010-6, Item 1).
13. Remove the two T20 screws securing the pulley axle to the stand (Figure
010-6, Item 2).
Figure 010-6:
Bowden Cable Holder and Pulley
14. Remove the pulley axle, pulley, and entire Bowden cable/spring assembly
from the stand.
15. Tie a sturdy cord (such as twine) to the J-hook at the end of the spring on
the new Bowden cable.
16. Feed the Bowden cable pin through the round opening in the table and
then through the opening behind the hinge to the outside of the table
(Figure 010-7, Item 1).
Summary of Contents for B 890
