Miele 11653560 Operating Instructions Manual Download Page 39

Page: 39 / 100

Programme chart

Woollens



Cold to 40 °C

Max. load 2.0 kg

Items

Wool or wool blend fabric

Tip

Reduce the spin speed for fabric that creases easily.

Silks



Cold to 30 °C

Max. load 1.0 kg

Items

Silks and other handwashable fabrics with no wool content, e.g.
satin, lace and silk

Tip

Place tights, bras etc. in a laundry bag.

Shirts

Cold to 60 °C

Max. load 1.0 kg/2.0 kg

Items

Shirts and blouses made of cotton and mixed fibre

Tip

- Pre-treat collars and cuffs depending on the level of soiling.

- Wash silk shirts and blouses in the

Silks

programme.

- If the preset

Pre-ironing

Extra is switched off, the maximum load

capacity is increased to 2.0 kg.

MobileStart



The Miele@mobile app is used for selecting programmes and operating the ap-
pliance.

QuickPowerWash

60 °C – 40 °C

Max. load 4.0 kg

Items

Lightly to moderately soiled garments which are also suitable for
washing in the

Cottons

programme

Tip

A special saturation process and wash rhythm ensure that the laun-
dry is cleaned particularly quickly and thoroughly.

Summary of Contents for 11653560





































































































Search results

Summary of Contents for 11653560

Reviews:

Related manuals for 11653560

Brands by name

Popular brands

Miele 11653560, Operating Instructions Manual

Search results

Summary of Contents for 11653560

Reviews:

Related manuals for 11653560

Brands by name

Popular brands