Before using for the first time
20
3. Remove the transit bars
Damage resulting from failure to
remove the transit bars.
Failure to remove the transit bars can
result in damage to the washing ma-
chine and to adjacent cabinetry or
appliances.
Remove the transit bars as described
in “Installation and connection”.
The following message appears in the
display:
Remove transit bars
Confirm with the
OK
sensor control.
4. Starting the calibration pro-
gramme
For optimum water and energy con-
sumption and excellent wash results, it
is important to calibrate the washing
machine.
To do this, the
Cottons
programme
must
be run without laundry and
without detergent.
No other programmes can be started
until calibration has been carried out.
The following message appears in the
display:
Open and run “Cottons 90°C” without
laundry.
Touch the
sensor control until the
OK
sensor control lights up and con-
firm with
OK
.
1:55
OK
90°
1400
Open the stopcock.
Touch the
Start
/
Add laundry
sensor
control.
The calibration programme then starts.
It will take approximately 2 hours.
At the end of the programme, the fol-
lowing message will appear in the dis-
play:
Set up complete
Reach under the door grip and pull
the door open.
Tip:
Leave the door slightly open to al-
low the drum to dry.
Turn the programme selector to the
position.
