Operation
65
Changing the microwave power level
Go to
Settings
|
Recommended power
levels
to permanently set the
recommended power level to suit your
personal cooking preferences.
Touch the microwave power level
display.
Change the microwave power level.
Select
Start
.
The programme will restart with the new
microwave power level.
Setting cooking durations
Cooking results can be impaired if
there is a long delay between the
food being placed in the oven and
the start of cooking. Fresh food can
change colour and even spoil.
Select as short as possible a time
until the cooking programme starts.
You have placed the food in the oven
compartment, selected a function and
the required settings such as the
temperature.
By entering
Duration
,
Finish at
or
Start at
,
you can automatically switch the
cooking programme off or on and off.
–
Duration
Enter the desired cooking duration
for the food. The heating will switch
off automatically once this duration
has elapsed. The maximum cooking
duration that can be set depends on
the function that you have selected.
–
Finish at
Specify when you want the cooking
programme to end. The oven heating
will switch off automatically at the
time you have set.
–
Start at
This function will only appear in the
menu if you have set a
Duration
or
Finish at
time. With
Start at
, you have
to specify when you want the
cooking programme to start. The
oven heating will switch on
automatically at the time you have
set.
Select
or
Timer
.
Set the desired times.
Confirm with
OK
.
For cooking programmes involving
steam, the cooking duration does not
begin until the set temperature is
reached.
If you are cooking at a temperature of
approx. 80 °C or above,
Steam
reduction
will appear in the display
shortly before the end of the cooking
duration and the door will
automatically open a little.
Wait until
Steam reduction
goes out in
the display before opening the door
and removing the food from the oven
compartment.
A new cooking programme can only
be started if the automatic door
release is retracted into its original
position. Do not push it in manually
as this could damage it.