
Cleaning and care
140
Cleaning the side runners
The side runners are suitable for
cleaning in a dishwasher.
Pull the side runners out of holder (1.)
from the front and remove them (2.).
The side runners can be washed in
the dishwasher or by hand with a
solution of warm water and a little
washing-up liquid applied with a
clean sponge or cloth.
Reassemble
by following these
instructions in reverse order.
Refit the side runners carefully.
If the side runners are not correctly
inserted, there is no anti-tip
protection.
The side runners are fitted in plastic
bushings. Check the bushings for
damage.
If the bushings are damaged, do not
use any functions involving
microwave power until the bushings
have been replaced.
Maintenance
The
Finish at
and
Start at
functions are
not available with maintenance
programmes.
Descaling the steam oven
We recommend using Miele descaling
tablets (see “Optional accessories”) to
descale the appliance. These have
been specially developed for use with
Miele appliances to optimise the
descaling process. Other descaling
agents, which contain other acids
besides citric acid and/or other
undesirable substances, such as
chlorides for example, could cause
damage to the product. Moreover, the
descaling result required could not be
guaranteed if the descaling solution
was not of the appropriate
concentration.
Do not spill descaling agent onto
metal surfaces. This can cause
marks to appear.
However, should any descaling
agent get onto these surfaces, wipe
it away immediately.
The steam oven has to be descaled
after a certain number of operating
hours. When the time comes to descale
it, the number of uses remaining lights
up in the display. It only counts the
number of uses that use steam. The
steam oven will be disabled after the
last remaining cooking process.
We recommend that you descale the
appliance before it locks out.
During the descaling process, the water
container must be rinsed out and
refilled with fresh water.