Midway Arctic Thunder, Manual

Page: 27 / 76

continued
Test
- - -
- - -
--- TEST
---
movement of the controller assembly use the Volume Up or Volume Down
--- Test a? the Diagnostic Menu, then press the Test button.
with controller assembly when any of the controller tests because
.
to select controller test then press Test button to enter
CONTROLLER TEST
CALIBRATE FEEDBACK
CONTROLLER CENTER
CONTROLLER LEFT
CONTROLLER RIGHT
CONTROLLER INFO
BURN-IN TEST
RETURN TO PREVIOUS MENU
the on-screen instructions when a test. A message will appear on-screen
test. Press the Test or Start button to exit test once this message appears.
FEEDBACK performs a complete sequence which turns the controller to the left,
at a variety of speeds. This is the most complete test for the controller.
CENTER, CONTROLLER LEFT, AND CONTROLLER RIGHT are individual
------- perform only the test specified by the name.
INFO test does not automatically turn the controller and requires operator input to
performs the same tests as the Calibrate Feedback option, except it does so in a
-- cycle. To exit this test mode the game machine must be powered off.
TEST
oroper functionality of the shaker assembly use the Volume Up or Volume Down button to
Shaker Test at the Diagnostic Menu, then press the Test button.
_ _
. -me buttons to select desired shaker test, then press the Test button. Please note, the seat
-mediately and automatically engaged once the Test button is pressed.
A
MUSEMENT
G
AMES
, LLC