Midway Arctic Thunder, Manual

Page: 30 / 76

2
BURN-IN TESTS
To properly diagnose Intermittent problems linking, steering, speakers, lamps, the seat shaker, or
blower use the Volume Up or Volume Down button to select Burn-in Test at the Menu, then
press the Test button. Select the desired test from the Burn-In Test menu.
A Burn-In test cycles non-stop through while dragnosing a problem. If an error is detected the Burn-In Test
will stop and an error message will display on-screen.
Inputs from the control buttons are ignored during Burn-In. The Burn-In Test cannot be halted from the
menus. To halt the test, switch off power to the game machine and then reboot game machine.
VERIFY SOFTWARE
To perform software verification use the Volume Up or Volume Down button to select Verify Software at
the Diagnostic Menu, then press the Test button.
The test diagnostic will automatically check the software in the span of a few minutes and then report the
outcome as pass or fail. Observe screen for test results.
To return to the submenu, press any button; to return to the Main Menu scroll to Back To Previous Menu
and press the Test button.
Main Menu
Utilities
UTILITIES
To make adjustments to a variety of bookkeeping memory banks use the Volume Up or Volume Down but-
ton to select Utilities from the Main Menu, then press the Test button.
To select desired Utilities option use the Volume Up or Volume Down, button, then press the Test button
U T I L I T I E S
I
RESET GAME TABLES
FREE PLAY
FULL FACTORY RESTORE
SOFTWARE UPDATE
COPY CMOS TO FLOPPY DISK
C H E C K D I S K
PREVIOUS MENU
A
RCTIC
T
HUNDER
1 9