Midway Arctic Thunder, Manual

Page: 69 / 76

L
INKING PROBLEM TROUBLESHOOTING
Symptom Cause Required Action
l
Cannot connect
Faulty wiring Install required crossover between cabinets. Each
ple Video Game
coupler connects two (one pair). Do not use
Machines standard telephone type couplers or for
together ing.
2. Use only 10 Base-T, Ethernet-type. Category 5.
twisted-pair
3. Do not overextend linking cables supplied with
VGM.
Improper
hardware
1. Use required network hub for your local network.
A Hub Link Kit permits up to four VGM connec-
tions. Array completion requires
brackets
and spacers.
l
VGM does not recog-
Improper settings
Record any error messages that occur during
nize other players in t e s t .
linking operation
2 . Check that each VGM has a unique ID number.
3 . Access the Diagnostic menu, then select LINKING
l
VGM functions TEST. Confirm the link is enabled.
by itself
Verify the hub receives power. AC adapter wires
1. Inspect hub Indicator lights.
l
Illuminated indicator lights for each active port
light up if the cable(s) are properly connected.
l
Check for cable continuity from hub to VGM for
each indicator that failed to light.
2 . Assure no loose wires are caught in hinges, doors
or under cabinet.
3. Verify linking cable connects to CPU Board for
each game.
4. each linking cable operates properly by
placing it in a working game.
L
CAUTION
Do not remove or install any connector when the power is turned on. Installation under power
will damage the circuit boards, ROM’s or hard disk drive and void the warranty.
A
RCTIC
T
HUNDER
T
ROUBLESHOOTING
5