GRX-3080 JLR EU STANDALONE
Midtronics B.V. Hoofdveste 6 Houten NL
www.midtronics.com
29
Chapter 11: Utility Menu
1. From the MAIN Menu, highlight the UTILITY icon and
press the SELECT key.
2. Use the RIGHT (
) ARROW to select one of the follow-
ing icons:
CONFIG CHARGER, DISPLAY, LANGUAGE, SHOP INFO,
COUPON, FORMAT CARD, UPDATE, BMIS DATA SEND,
WIFI SETTINGS, and VERSION INFO.
Config Charger
DATE AND TIME
WRITE FAIL
TEMPERATURE UNITS
POWER SUPPLY VOLTAGE
BUZZER
DIAG VOLTAGE LIMIT
DIAG AMP LIMIT
PAG CODE
Date and Time menu
Use the ARROW keys to select one of the following items
followed by ADJUST
Mode
1. Press the UP (
) or DOWN (
) ARROW or press the cor-
responding numerical key (1 or 2) to move the dot to the
option button of your choice. Select the 24-hour or AM/
PM mode.
2. Press the SAVE soft key to save your setting or the BACK
soft key to return to the menu.
If you use the alphanumeric keypad to enter the number
preceding the option button, no additional keypress is
needed to save your selection.
Time
1. Use the UP (
) or DOWN (
) ARROW to change the
hour, minutes, or AM/PM.
9
: 19
PM
2. Press the SAVE soft key to save your setting or the BACK
soft key to return to the menu screen without saving the
changes.
Format
1. Use the UP (
) or DOWN (
) ARROW or press the cor-
responding numerical key (1 or 2) to move the dot to
the option button of your choice.
1
MM/DD/YYYY (month/day/year)
2
DD/MM/YYYY (day/month/year)
2. If you used the ARROW keys, press the SAVE soft key to
save your setting or the BACK soft key to return to the
menu.
If you use the alphanumeric keypad to enter the number
preceding the option button, no additional keypress is
needed to save your selection.
Date
1. Use the ARROW keys to highlight the month, day, or
year. To rapidly scroll, hold down an UP (
) or DOWN
(
) ARROW key.
1
/ 1 / 2015
2. Press the SAVE soft key to save your setting or the BACK
soft key to return to the menu screen without saving the
changes.
Write fail
After each measurement the test results are stored on the
data card. In case the data cannot be stored on to the card
you can select the way this is notified to the operator.
1. Press the UP (
) or DOWN (
) ARROW or press the cor-
responding numerical key (1,2 or 3) to move the dot to
the option button of your choice.
1
ASK (operator is asked if it is ok to continue
even when results are not stored)
2
IGNORE (measurement is not stored and
operator not notified)
3
FORCE (measurements can only continue
when data card is entered)
2. Press the SAVE soft key to save your setting or the BACK
soft key to return to the menu screen without saving the
changes.
If you use the alphanumeric keypad to enter the number
preceding the option button, no additional keypress is
needed to save your selection.
Chapter 11: Utility Menu
