34
Chapter 13: EXP Internal Batteries
EXP-800
The EXP uses six AA, 1.5-volt batteries (alkaline recommended)
to allow testing of batteries down to 1 volt and supply power
while the menu is active.
Battery Power Indicator
The square in the upper left corner of the display indicates
the charge level of the battery pack. The square is black when
the battery pack is fully charged. It gradually changes to white
as the charge level declines. The EXP will display a warning
message when the batteries need replacing.
Full
Powered
by vehicle
battery
Decreasing
Low
Replacing the Internal Batteries
1. Turn the analyzer face down.
2. Use a Philips screwdriver to remove the screw securing
the door to the battery compartment.
Remove the screw
and lift the tab
3. Lift the door at the tab and place it aside.
4. Remove the discharged batteries.
5. Insert new batteries as shown. Make sure the positive and
negative terminals are positioned correctly.
6. Reposition the door on the battery compartment.
7. Reinsert and tighten the screw.
Chapter 13: EXP Internal Batteries
Summary of Contents for EXP-800
Page 2: ...blank page behind cover ...
Page 35: ...35 ...
