background image

167-000502EN-A   9/13   2013 ©Midtronics, Inc. All rights reserved.

www.midtronics.com

Corporate Headquarters

 

Willowbrook, IL USA

 

Phone:          1.630.323.2800
Canadian Inquiries

 

Toll Free:            +1 1 866 592 8053

 

 

Midtronics b.v.

European Headquarters

Houten, The Netherlands 

 

Serving Europe, Africa, the Middle

East, and The Netherlands

 

Phone:               +31 306 868 150

 

Midtronics China

 

China Operations

 

Shenzhen, China

 

Phone:   +86 755 8202 2036

 

 

 

Midtronics India

Navi Mumbai, India

Phone:     +91 22 27564103/1513

 

 

Contact Corporate Headquarters

Phone:                 +1.630.323.2800

Asia/Pacífic (excluding China)

PATENTS

This product is made by Midtronics, Inc., and is protected by one or more U.S. and foreign patents.  For specific patent information, 

contact Midtronics, Inc. at +1 630 323-2800.

LIMITED WARRANTY

Midtronics products are warranted to be free of defects in materials and workmanship for a period of one (1) year from date of 

purchase.  Midtronics will, at our option, repair or replace the unit with a re-manufactured unit.  This limited warranty applies only to 

Midtronics products, and does not cover any other equipment, static damage, water damage, overvoltage damage, dropping the unit, 

or damage resulting from extraneous causes including owner misuse.  Midtronics is not liable for any incidental or consequential 

damages for breach of this warranty.  The warranty is void if owner attempts to disassemble the unit or to modify the cable assembly.

SERVICE

To obtain service, contact Midtronics at 1-630-323-2800.  Have your model and serial numbers ready.  This first step is critical as we will

trouble-shoot the problem(s) over the phone, and many perceived problems are in fact resolved during this step.  If the problem cannot

be resolved, then the CS Agent will issue you a Return Material Authorization or RMA.  This number becomes your tracking number.  The

final step is to return the unit to Midtronics freight prepaid (you pay), to the attention of the RMA number obtained.

In USA:

Midtronics, Inc.

Attn: RMA # xxxxx (this is the RMA number that you must obtain from Midtronics)

7000 Monroe St.

Willowbrook, IL 60527

If Midtronics determines that the failure was caused by misuse, alteration, accident, or abnormal condition of operation or handling, 

purchaser will be billed for the repaired product and it will be returned freight prepaid with shipping & handling charges added to the 

invoice.  Midtronics products beyond the warranty period are subject to the repair charges in place at that time.

Summary of Contents for EXP-1002

































Reviews: