Midtronics EBT-965P, User Manual

Page: 5 / 30

www.midtronicseurope.com
1: Introduction EBT-965P
5
1: Introduction
Personal Precautions
Risk of explosive gases. Never
smoke or allow a spark or flame
in the vicinity of a battery.
Batteries can produce a highly
explosive mix of hydrogen gas and
oxygen, even when the battery is not
in operation. Always work in a well-
ventilated area.
Wash hands after handling.
REQUIRED BY CALIFORNIA PROP. 65: Battery
posts, terminals, and related accessories contain
lead and lead compounds, chemicals known to
the state of California to cause cancer and birth
defects or other reproductive harm.
Inspect the battery for damage and check the electrolyte level. If the electrolyte level is too
low, replenish it and fully charge the battery. Always use the necessary safety precautions when
working with batteries to prevent severe injury or death. Follow all manufacturers’ instructions
and BCI (Battery Council International) safety recommendations, which include the following
precautions:
9 Battery acid is highly corrosive. If acid enters your eyes, immediately flush them thoroughly
with cold running water for at least 15 minutes and seek medical attention. If battery acid
gets on your skin or clothing, wash immediately with a mixture of water and baking soda.
9 Always wear proper safety glasses or face shield when working with or around batteries.
9
Keep hair, hands, and clothing as well as the analyzer cords and cables away from moving
engine parts.
9 Remove any jewelry or watches before you start servicing the battery.
9
Use caution when working with metallic tools to prevent sparks or short circuits.
9
Never lean over a battery when testing, charging, or jump starting.
Symbols Conventions Description
Symbol Description
!
The safety symbol indicates
instructions for avoiding hazardous
conditions and personal injury.
The safety symbol with the
words CAUTION , WARNING, or
DANGER indicates instructions for
avoiding hazardous conditions and
personal injury.
The wrench symbol indicates
procedural notes and helpful
information.
The analyzer uses function-specific applications
accessed through a series of menus and icons
to guide users through the battery testing
process for consistent testing implementation
and accuracy. These are accessed using the
tester’s touch screen display. Test results can
be displayed on the full-color screen, printed,
or wirelessly emailed.
Consent to Collection and Use of Data:
The user of this tool consents that Midtronics may collect, store, transmit, and use technical data
and related information, including but not limited to technical information about this device,
system and application software, test results, and accessories. This inforamtion is gathered
periodically to facilitate the provision of product support, product improvements, product
development, and other services related to use of this battery and electrical system analyzer. The
technical data and related information is in a form that does not personally identify the user.