Just the Facts for the Classic Lite (continued)
18 |
P a g e 1 0 - 2 0 8 - 1 R E V : A
Equalization with the Classic Lite
Auto Equalize Section 1 Switch 8
Equalize
Manual
Off
Auto
On
Table 4
By setting Auto Equalize to Manual the Equalize intervals in the Battery Settings table are effectively disabled and
Equalization stages will have to be started manually.
Please note that not all manufacturers recommend Equalizing AGM batteries. Check with your manufacturer and
make sure to DISABLE auto Eq on the Lite if your manufacturer does not recommend equalizing your AGM
batteries
Equalize Button
The Equalize button serves two purposes: the first is to begin an Equalize stage, the second is to clear faults.
Equalization:
An Equalize stage can be scheduled or started at any time by holding the Equalize button down for 2-3 seconds.
Holding the the EQ button down for 2-3 seconds at any point once equalization is activated will cancel the
equalization stage and return back to the most appropriate battery stage.
When the equalize button is pressed, the EQ light will come on solid. Once Equalize proper starts the light will
flash. If Equalization cannot begin immediately then the MNGP Lite will try to engage equalization for 18 hours
and then stop if it can't.
See
Table 3
for the Voltage and Time parameters of EQ.
Section 1
Section 2
Mode
System
Voltage
Battery
Type
EQ
DHCP
IP Address
MODBUS
port
1
2
3
4
5
6
7
8
On
1
2
3
4
5
6
7
8
On
