9
Transmit Delay:
In Lone Worker mode, if the user does not interact with the radio before this amount of time
passes, the ENI sequence will be transmitted. This time is in seconds.
Warning Tone Enable:
This will generate a tone sequence to alert the user the ENI is about to be transmitted.
Warning Tone Delay:
In Lone Worker mode, if the user does not interact with the radio before this amount of
time passes, the emergency warning tone will be sounded. This amount of time must be less than that of the
Transmit Delay for the warning tone to be sounded. Also, the Warning Tone Enable box must be checked for the
tone to be sounded. For example, based on the screen shown above after 105 seconds of no activity the unit will
generate warning tones. The user then has 15 seconds to interact with the radio to keep the Transmit Delay time
of 120 seconds expiring and the ENI being transmitted.
Continuous Warning Enable:
This will generate a constant tone to alert the user the ENI is about to be
transmitted.
Power-up with Lone Worker on:
If checked the unit will be in Lone Worker mode when the radio is turned on.
This eliminates the need for the user to use the mode input to turn the Lone Worker mode on.
Motion Resets Delay Timers:
The unit can then use the accelerometer to detect motion based on the Motion
Sensitivity setting to determine if the user is in distress in addition to requiring interaction with the radio.
Motion Sensitivity:
This sets a level of motion required to reset the Transmit Delay timer. Some work
environments may have an inherent level of motion that would be detected by lower settings of the accelerometer,
so a higher level of sensitivity might be needed. Midian recommends experimenting to determine the best
sensitivity setting for the work environment.
