11
PTT > Active Polarity:
This sets whether the unit looks for an active low or active high to start a recording.
PTT > Debounce:
If checked the unit will require a continuous active state for 30 msec before accepting the PTT.
Mode > Type:
Select whether the switch is Momentary or Latched.
Mode > Active Polarity:
Select the active polarity of the mode switch. In this case it should be Low.
Mode > Debounce:
If checked the unit will require a continuous active state for 30 msec before accepting the
mode change.
The remaining fields set how the switch is used (short press, long press or double press) and for which function
(record start, record stop/play, record start/stop, Lone Worker enable or Lone Worker Reset).
