5
Wake on COR/Wake on VOX:
Select the appropriate method that the unit should use to come out of power save.
COR Hold-Up Time
This is the amount of time after loss of COR/VOX that the unit considers COR/VOX dropped.
VOX Settings > Sensitivity:
This is a threshold detection based on the energy level in the audio.
VOX Settings > Attack Time:
This sets the minimum time before the unit will detect VOX based on the sensitivity
setting.
VOX Settings > Decay Time
: This sets the time before the unit will drop the VOX detection. Be certain to set this
long enough so that you do not have drop outs between words or on brief pauses.
Beep Options > Power Up:
Enables a short beep sequence that takes place immediately after power-up.
Beep Options > Error:
This beep may be triggered by any input event if programmed to do so. For example, if a
long press on the Mode Input is not assigned to a function, it may be configured to generate the error beep.
Beep Options > Mode:
This is used to indicate to the user when the mode has been enabled/disabled (i.e..
Beep Options > Go Ahead:
This is a local beep out the speaker to indicate to the user that ANI has been sent
and it is okay to talk.
Beep Options > Wake Up Beep:
Enables a short beep to be sent over the air immediately after PTT is pressed.
Enabling this beep is recommended when the 'Wake on VOX' feature is used.
Beep Options > Courtesy Beep:
If selected, once the unit is done retransmitting the recorded audio it will
generate a courtesy tone to let others know it is done retransmitting.
Beep Options > Enable Side Tone Pin:
Future Use.
Voice Compression:
If left unchecked the VAE-1 can store up to a 3-minute voice message. If check the VAE-1
can store up to a 2.25 minute voice message, but with a higher level of audio quality.
