6
Motorola GM-339, GM-340, GM-360, GM-380, GM-399, PRO-7200 Programming Instructions
It is necessary to program the radio before installing the unit. This is because the
Option Board Feature
of the
radio must be enabled in order to program the unit using the Motorola RIB box and cable or RIB-less cable and to
hear confirmation beeps from the radio after programming the unit.
1. In the Per Radio Miscellaneous Window under the Global Tab, select “Advanced” as the “Option Board Type”
and set the RX Audio (Accessory Connector) to “Filtered Squelched”. Note: The Accessory Connector is the
rear accessory connector, but this setting also affects the audio going to the options connector.
2. For each personality, under the Miscellaneous tab, the “Option Board” must be enabled. Check the Option
Board box for all channels if using a button to control the repeat mode. If doing repeat on a per channel basis,
then check Option Board Feature only for repeat enabled channels. Additionally the unit should be
programmed to Power Up in Store/Retransmit Mode.
