15
Power Up In Store/Retransmit Mode:
If selected the unit will power up in repeat mode. This box must be
selected if doing repeat enable on a per-channel basis.
Key-Up Delay:
This sets the amount of time the unit waits after keying the base station radio before it starts to
retransmit the recorded audio.
Trunking Delay Enable:
Check this box if using a trunking system. This will cause the unit to hold off
regenerating the recorded audio until it has received a channel acquisition acknowledgement from the base
station radio. If no channel acquisition is received within 6 seconds the SVR-1 will cancel the retransmit cycle.
Common PTT:
Check this box if PTT In and PTT Out are connected to the same point.
PTT Cancels Store/Retransmit:
If checked and the PTT is pressed during store/retransmit the unit will not
retransmit the incoming transmission.
Number of Retransmits:
This sets how many times the unit will retransmit the last recorded audio clip. Set to 0
for continuous transmission.
Retransmit Interval:
This sets the time interval between the retransmits set in the Number of Retransmits field.
