7
As soon as transmission over radio can begin, the announcement will be broadcast over the PA and transmitted
over the radio at exactly the same time. If the Multicast Sync Window Delay time expires, the announcement will
be broadcast over the PA even if transmission over the radio cannot begin. In that case, transmission over radio
may begin at a later time or not at all depending upon the Impolite Multicast and Multicast Busy Lockout Delay
settings.
General Settings -> Miscellaneous
Admin Inactivity Timeout -
Administrator Mode
will be terminated if there has been no administrator activity for
this amount of time. 'Goodbye' will be heard from the administrator microphone if this occurs.
DTMF Inactivity Timeout -
This specifies how long the system will wait for a DTMF command to be entered. If
this time expires while the system is waiting for a command, 'Goodbye' will be heard and the user will be logged-
off the system. This applies to both radio and telephone operation.
Live Mode Timeout -
This specifies how long the system will remain in
Live Mode
. If the user has not terminated
Live Mode
by either releasing PTT or pressing '#' before this time expires, 'Goodbye' will be heard and the user
will be logged-off the system. This applies to both radio and telephone operation.
Passcode -
This is the
passcode
that must be entered in order to log in to the system (if the
passcode
requirement is enabled). It may consist of digits '0' - '9' and be 0 to 8 digits long. When a user enters a
passcode
via either radio or telephone, it must be followed by '*'. When the
passcode
is 0 digits long, then '*' by itself is the
passcode
.
