3
After entering the parameters, save the file by going to File - Save As. Enter the file name in the File Name block
and click Save. Saving the file will allow for quick and easy reprogramming of units.
Push the power button on the KL-4F and within 15 seconds select Program Unit or Read Unit in the
software.
After programming or reading the unit, turn off the unit for 3 seconds and then turn back on.
Regarding the headphone/programming jack on the front of the unit:
The headphone jack on the front of the unit is used for programming.
Programming must begin within 15 seconds of turning the unit on.
Power must be cycled (power turned off and then on) after programming.
If headphones are used, they will not be active for the first 15 seconds after turning the unit on.
General Info -> Unit Information
This information area is updated when a unit is read or programmed. It will also be updated when a data file is
loaded from a previous unit read and then saved. Below is a summary of the fields:
Product -
Shows a more detailed description of the product model within the series.
uP #1 Firmware Version -
Indicates the reported Firmware Version of the primary microprocessor of this product.
uP #1 Loader Version -
Indicates the reported Loader Version of the primary microprocessor of this product.
