4)Convection temperature Test
NOTE:
The appliance is enough cool.
The power output is also affected by line voltage under load, so this test is an
approximation only
a)Place the beaker into the center of cavity.
b)Place the water load into the microwave oven on the center of the load bearing
surface.
c)Close the oven door.
d)The microwave oven is to be operated at 100 % power ( scroll the power level
pad : “a”)
e)Press start key (“b”) and operate for 5 minutes.
f)Hold the probe on the grip provided and move at 2.5 cm/second.
g)Touch stop key (“c”) after finishing the test.
h)The leakage should not exceed 5 mW/cm
.
a)Open the door and take out the wire rack and pizza pan and then close door.
b)Select convection temperature 150
℃
for 10 minutes ( scroll the power level pad :
“a”).
c)Check the temperature in the display (“b”).
d)The temperature should be within150
℃
+/- 15
℃
.
43
