Requirements
Check that the following requirements have been met:
Removing components of the door assembly
The appliance has been disconnected from the power supply and protective
measures have been taken to ensure the power cannot be switched on again.
The appliance is cool.
The high voltage capacitors are discharged before commencing work.
Anti-static precautions have been taken.
2
Remove the door assembly from the
oven performing a rotational movement
of lifting the door up and pulling it away
from the casing.
Turn the hinged clip over to one end
of the door assembly with iron pliers
to remove the self-locking state of
the hinge.
Tilt the oven door to an angle of
approx. 30° relative to the ground.
3
1
Fitting the components of the door assembly
Follow the steps in the reverse order to reassemble the compo-nents of the oven door
and to fit it to the oven.
5.6 Replacing a magnetron
Requirements
Check that the following requirements have been met:
The appliance has been disconnected from the power supply and protective
measures have been taken to ensure the power cannot be switched on again.
The appliance is cool.
The top, left and right panels of the casing of the appliance have been removed.
The high voltage capacitors are discharged before commencing work.
30
