![background image](http://html1.mh-extra.com/html/midea/tje17gs7-s00n0a/tje17gs7-s00n0a_service-manual_1791424044.webp)
2)Microwave Power Test
The display will appear to operate
the microwave and heater output
5
3)Microwave Leakage Test
NOTE:
The test load is a 600 ml Kimax beaker with an inside diameter of approximately 8.5
cm.
The beaker shall be filled with 275 +/-15 ml of potable water at room ambient
temperature.
The supply voltage 208 / 240VAC.
NOTE:
The appliance is enough cool
The power output is also affected by line voltage under load, so this test is an
approximation only
a)Fill a microwave safe container (Glass) with 1 liter of water at 20
℃
(68F)
b)Place the container into the center of cavity.
c)Select microwave power 100% ( scroll the power level pad : “a”)
d)Touch start key (“b”) and operate for 1 minute.
e)Open the door or touch stop key(“c”)
f)Remove the container form cavity.
g)Immediately stir and measure the water temperature by using thermometer
h)Calculate the temperature rise of water (End temperature minus start tempera-
ture)
i)The temperature rise should be 20C +/- 10%
42