![background image](http://html1.mh-extra.com/html/midea/tje17gs7-s00n0a/tje17gs7-s00n0a_service-manual_1791424035.webp)
Check that the following requirements have been met:
Fitting the control panel
Follow the steps in the reverse order to fit the control panel.
5.8 Replacing the baseplate assembly.
Requirements
4
2
Remove the two M4 screws.
Unplug the three wires.
Lift up the control panel.
3
1
The appliance has been disconnected from the power supply and protective
measures have been taken to ensure the power cannot be switched on again.
The appliance is cool.
The top, left and right panels of the casing of the appliance have been removed.
The high voltage capacitors are discharged before commencing work.
33