![background image](http://html1.mh-extra.com/html/midea/p71/p71_operation-and-instruction-manual_1791697006.webp)
使用说明
产品储存
Product Operation
使用说明
Product Operation
11
10
Product Store
产品储存
Product Store
Place the Charging Station at the position there is power Socket, connect the power core or adaptor, put
the product on the Charging Station, then start to charge.
把充电支架放置于有电源插座的位置,插上电源,每次使用完后把机器放置于充电支架上,同时
机器开始充电。
使用说明
产品储存
Product Operation
使用说明
Product Operation
Product Store
充电座安装
Charging Seat Installation
充电座前盖组件和充电座底盖组件之间通过对接端子连接导通,如图所示在组合时先将公插母插对接好以后,将多余
长度的导线和对接端子塞入金属管内,然后将充电座前盖组件插入充电座组件内部,观察金属管弹珠从充电座底盖孔
内部弹出,说明已经安装到位(组装时如果需要用很大的力按压,请检查是不是金属管压线)。
Connect by the male and female connector between the front cover assembly and bottom base assembly on the
charger station, put the wire and connector into the metal tube after connect the male and female like the picture,
then insert the front cover assembly into the charger base, double check, it is ok if the metal ball does not come out
from hole(notice: if need big push force when install, then please check whether the wire is pressed in the metal).