![background image](http://html1.mh-extra.com/html/midea/msg-07crn2/msg-07crn2_service-manual_1790856027.webp)
Service manual
- 23 -
8.7 Balance refrigerant of the 2-way, 3-way valves
Procedure:
1. Confirm that both the 2-way and 3-way valves are set to the open position.
2. Connect the charge set to the 3-way valve’s service port.
Leave the valve on the charge set closed.
Connect the charge hose with the push pin to the service port.
3. Open the valves (Low side) on the charge set and discharge the refrigerant until the gauge
indicates 0.05 to 0.1 Mpa.
If there is no air in the refrigeration cycle [the pressure when the air conditioner is not running is
higher than 0.1Mpa, discharge the refrigerant until the gauge indicates 0.05 to 0.1 Mpa. If this is the
case, it will not be necessary to apply a evacuation.
Discharge the refrigeration gradually; if it is discharged too suddenly, the refrigeration oil sill be
discharged.
Summary of Contents for MSG-07CRN2
Page 2: ......
Page 15: ...Service manual 11 5 Refrigerant cycle diagram Cooling only Heat pump mode...
Page 17: ...Service manual 13 7 Schematic diagram and Wiring diagram 7 1 Schematic diagram...
Page 21: ...Service manual 17 7 2 2 MSG 07HR MSG 09HR MSG 12HR...