Midea MONB-76C, Technical Manual

Page: 82 / 87

MCAC-RTSM-201301-01 Midea R22 T1 side-discharge duct manual
71
9.4 Operating the wired controller
1) AUTO Operation
※
Insert the power supply of indoor unit, and operation lamp of indoor unit will flash.
※
Push MODE to select AUTO .
※
Set the desired temperature by pushing the TEMP
▲
and TEMP
▼
, usually the
temperature range is set from 17°C to 30°C.
※
Push ON/OFF , the operation lamp of indoor unit lights, the air conditioner starts operating at
the automatic mode, and the fan speed is controlled automatically, wire controller display
screen display AUTO , so the fan speed is un-adjustable.
※
Push the button ON/OFF again, and the air conditioner stops operating.
Notes: The ECONOMICAL button is available at the auto operation mode.
2) COOL/HEAT/FAN ONLY Operation
※
Push the MODE button to select any one of COOL , DRY , HEAT or FAN ONLY mode.
※
Select the desired temperature by pushing the TEMP
▲
and TEMP
▼
, usually the
temperature range is set from 17°C to 30°C.
※
Push the button FAN SPEED to select any one of AUTO , LOW , MED or HIGH fan speed
modes.
※
Push the ON/OFF , the operation lamp on indoor unit lights, the air conditioner operates
according the mode selected.
※
Push the button ON/OFF again, stop the air conditioner.
Notes:
1. Under fan only mode, the temperature cannot be set.
2. The economical button is valid in cool, heat mode.
3. Cooling only unit has not heat mode.
3) DRY Operation
※
Press MODE to select DRY mode.
※
Select the desired temperature by pushing the TEMP
▲
and TEMP
▼
, usually the
temperature range is set from 17°C to 30°C.