Midea MDFA-76CRN2, Manual

Page: 85 / 88

-UTSM-12
88
7. Electric Connection
7.1 Electric field wiring
CAUTION:

Use special power supply for the air conditioner. Design power supplies specific to the indoor unit and
outdoor unit. The supply voltage must comply with the nominal voltage.

The external supply circuit of the air conditioner must have a ground wire, and the power supply ground
wire of the indoor unit must be connected with the external ground wire firmly.

The wiring must be performed by professional technicians according to the circuit diagram labels.

Distribute the wires according to the relevant electric technical standards promulgated by the State, and set
the Residual Current-operated Circuit Breaker (RCCB) properly.

The power wire and the signal wire shall be laid out neatly and properly, without mutual interference or
contacting the connection pipe or valve.

No power cable is attached to this equipment. The user can select the power cable by reference to the
stipulated power supply specifications. No joint of wires is allowed.

Upon completion of wire connection, double check it and then connect the power supply.
Duct type- cooling only: 76 kBtu/h; 96 kBtu/h; 120 kBtu/h,