8
3-3 Filter Replacement Cycle
indicator turns off, and the product stops outputting water. After stopping water, the water
temperature selection automatically switches to “Ambient Water” 5s later. During the water output
process, the Water Temperature Selection button and the Quantitative Water Output button are
unavailable.
1.2 Quantitative water output after selecting water temperature
Select the Water Temperature button, corresponding indicator turns on, then select the
Quantitative Water Output button, Quantitative Water Output indicator turns on, within 5s,
press the “Taking Water” button to output water, after outputting water for 10S, the water
output is automatically stopped, the Quantitative Water Output indicator turns off. During the
water outputting process, press the “Taking Water” button again to stop outputting water, the
Quantitative Water Output indicator turns off. After stopping water, the water temperature
selection automatically switches to “Ambient Water” 5s later. During the water output process,
the Water Temperature Selection button and the Quantitative Water Output button are
unavailable.
6-12 month
18 month
PP&Carbon block filter
UF membrane filter
Special hints:
The data above are for references only. It is based on 10 L per daily drinking water. The specific
cycle for replacement of filters varies with local water quality and water amount consumed.
while the "Filter" is twinkling, it indicates the filter should be changed as the schedule. After you
replace new cartridges, please long press "ECO" button until "Filter" stops twinkling to reset the
filter indicator.
1. Keep this machine in a dry and cool place and avoid direct sunshine. Never put the machine on
paper or foam, which may store water and then cause creepage. Never put anything flammable
beside this machine. Do not use the machine outdoors or in a place that can be splashed by
water.
2. For the water purifier, the installation and replacement of filters must be carried out by qualified
personnel.
3. In case the machine is not in use for a long time, turn off the heating switch or the refrigerating
switch to save power.
4. In case the machine is not needed for a long time, please take off the plug, turn off the water
inlet and drain off the remaining water through the outlet. Before drain off the remaining water,
please turn off the Cooling switch and the Heating switch and taking out hot water form water
outlet. After that, please pull the plug and then drain off the remaining water. When drain off the
cold tank water, it can accelerate the draining speed by taking off the top cover and pull out the
cold tank quick connector. For another use, discharge water for 10 min, In the event that the
machine is blocked by ice due to the environment below ice point, keep the refrigerating switch
closed for 4 hours and then turn it on continue the operation.
5. In case the water supply is cut off, please close the feed water ball valve and cut off the power.
After water re-supply, please open the other faucets to discharge sediment and then turn on the
feed water ball valve.
3-4 Maintenance
2 ECO Function
Under the state that ECO function is enabled, if it detects that the light diminished, it will turn
off the heating and cooling function. If it detects that the light turned bright, the heating and
cooling function will be recovered automatically.
Summary of Contents for JL1645T-Z
Page 11: ......