Midea HS-202WEN, Service Manual

Page: 21 / 38

Service Manual_2018-V2.0
21
Sensor
Sensor in refrigerating chamber
Before remove the sensor, the refrigerating duct
assembly should be removed
1
）
Remove the air duct assembly from the refrigerating.
2
）
Remove the sponge tape on the surface and remove
the sensor.
The sensor position is on the back of the duct cover.
8.6 Compressor case
Rear cover and compressor case
1
）
Remove by cross screwdriver the screws fixing back
cover plate of compressor chamber anticlockwise
2
）
Take the back cover plate of compressor chamber .
Compressor and the cooling system pipe
1
）
Cut off the power, remove the goods in the wine cooler,
with the tape to make the door fixed firmly and prevent
the door dropping when the wine cooler dumping.