background image

 
 

                                                                    Service Manual_2020-V3.0

 

7

 

CONNECTING ELECTRICITY 

Electrical Shock Hazard.

 

Plug into a grounded 3-prong outlet. 
Do not remove the ground prong. 
Do not use an adapter.

 

Failure to follow these instructions can 
result in death, fire, or electrical shock.

 

 

WARNING

 

Electric Shock Hazard 
Failure to follow these instructions can result in electric shock, fire, or 
death.

 

1) WARNING

–Keep ventilation openings, in both the freezer and the built-in structure, 

clear of obstruction. 

2) WARNING

–Do not touch the interior of the freezer with wet hands. This could result 

in frost bite. 

3) WARNING

–Do not use mechanical devices or other means to accelerate the 

defrosting process, other than those recommended by the manufacturer. 

4) WARNING

–Do not damage the refrigerant circuit. 

5)

 

WARNING

–Do not damage the refrigerant tubing when handling, moving, or using 

the freezer. 

6) WARNING

–DANGER

–Never allow children to play with, operate, or crawl inside the 

freezer. Risk of child entrapment. Before you throw away your old freezer: 

6-1) 

Take off the doors 

6-2) 

Leave the shelves in place so that children may not easily climb inside 

7) 

Unplug the freezer before carrying out user maintenance on it. 

8) 

This freezer can be used by children age eight years and older and persons with 

reduced physical or mental capabilities or lack of experience and knowledge if they are 
given supervision or instruction concerning the use of the freezer in a safe way and 
understand the hazards involved. Children should not play with the freezer. Cleaning and 
maintenance should not be performed by children without supervision. 

9) 

If a component part is damaged, it must be replaced by the manufacturer, its service 

agent, or similar qualified persons in order to avoid a hazard. 

10) 

Please dispose of the freezer according to local regulations as the freezer contains 

flammable gas and refrigerant. 

11) 

Follow local regulations regarding disposal of the freezer due to flammable 

refrigerant and gas. All refrigeration products contain refrigerants, which under the 
guidelines of federal law must be removed before disposal. It is the consumer's 
responsibility to comply with federal and local regulations when disposing of this product. 

12) 

This freezer is intended to be used in household and similar environments. 

Summary of Contents for HD-676REWN


























































Reviews: