Midea HD-676REWN, Service Manual

Page: 29 / 57

Service Manual_2020-V3.0
29
4
）
pull the fan blades with big strength, until it is
separated from the shaft of fan motor; if need to
replace the fan motor, the reverse operation is for
assembly
7.6 Evaporator and Defrost system
Evaporator in freezing chamber
Evaporator in freezing chamber
1
）
Remove the air duct components in freezing
chamber.
2
）
Disconnect all connectors.
3
）
Remove the welding on inlet and outlet tubes.
Remove two screws which are used to fix the evaporator
and remove the evaporator.
Components on the evaporator
Defrost heater with defrost sensor and fuse, it can be
replaced separately.
1
）
Cut off wiring terminal
2
）
Cut off the band which fixes the sensor
3
）
Cut off the band which fixes the fuse
4
）
Separate the sensor and the evaporator
5
）
Take off the defrost heater from the supporting plate
of evaporator